Overbuilding a Solar Wood Drying Kiln

I have wanted to develop a solar wood drying kiln for quite a long time. I have a collection of wood that I have actually scrounged for many years that is air dried well enough, however it would be great to get it the last couple of percent dryer and eliminate whatever bugs live in the wood. I discovered a spot at the top of my garden that has a great quantity of sun during the day. I placed some concrete blocks on the ground and constructed a frame for the floor of the kiln that will be around 4 ft by 10 ft large. I then built the four walls and the roof. The big idea for this kiln is to have both a clear plastic roofing system and a black metal ceiling. Between these 2 things there's a space where the air will be warmed by the sun. I then have a fan that draws this air down into the South wall and out of the bottom inside the kiln and through the stack of drying wood. This air is then drawn back up into the ceiling where it is reheated by the sun. I have also developed a big movable floor that works on angle iron tracks. This floor is connected to the door so that I can pull the door open and pull the wood out in one big swoop. It appears to work effectively. I put the wood in at the start of the summertime at about 10 to 12% wetness and it is now around 7% and even lower than my wetness meter will determine. And the bugs appear to be gone.

Passionate CNC

C & L Metal Sales LLC

Pantorouter

To see upcoming projects follow me on social media

Patreon

Bluesky:

Instagram

Facebook

0:00 (intro).
1:55 (floor).
4:56 (walls).
12:35 (roof).
17:34 (fan).
22:54 (siding).
26:25 (ceiling).
27:29 (fan).
32:37 (very first run).
35:39 (moving flooring).
43:02 (conclusion).

Ted's Woodworking Plans Online Course
Woodworkers Secrets Revealed – Click Here to Discover the #1 Woodworking Resource!

You May Also Like

About the Author: Woodworking Carpentry

22 Comments

  1. I always love your videos. Im curious as to the software you used to show the Airflow. Really really nicely done!

  2. This video is so good! It would have taken me 3 months just to edit it. Every shot is perfect, the lighting, the framing, the animations and overlays. And of course it is a cool project with so much creativity and perfect techique, I learn so much watching these!

  3. Quiet a lovely project. One suggestion is that you use up-cycled glass from salvaged single-pane windows as glass is slightly better for use in solar heating. We have a glass-fronted solar chimney (at least, that’s what we’ve always called it) as a heater for our back garden greenhouse (somewhat further south of you, 38th parallel) and almost never see temps below 8.0 °C in it. When we had a (mostly) clear plexiglass panel on the front, it tended to run below freezing on particularly cold nights. Now the problem is that, if we forget to open the roof vents, it can get amazingly hot in there during peak summer heat. Bad for plants, but I reckon very handy for a solar wood kiln. Also, you would do best to keep the black metal panel parallel to the roof, than making it pivot. The heat generated really comes down to the angle of the sunlight relative to the transparent panel. Because of your location’s latitude, keeping the general angle of the roof steep is what matters most. A steep angel will also help shed whatever snow you might get.

  4. The way those little dehumidifiers work is that they cool the air down to below dewpoint so that the water in the air (passing through the dehumidifier) condenses. Because the air in the kiln is so warm, that unit probably can’t get the air going through it cold enough to condense. For example, the dehumidifier might only have enough capacity to change its CFM of air by 20°F. In a house, that would cool air from 74°F down to 54°F which would be cold enough for moisture to condense on the coil and drain out. In your kiln, if the air coming into the dehumidifier is 100°F it is only going to get down to 80°F so no condensing. The dehumidifier is only going to help on days where there is no sun and the kiln is “cool”.

  5. So reassuring that after all your amazing efforts IT WORKS! Mind you, many of us out here never doubted for a second 🙂 Wonderful watch again – thank you for sharing it with us.

  6. Really beautiful work, Frank! 😃
    That’s definitely going to be really useful for you!!!
    Stay safe there with your family! 🖖😊

  7. Your videos are always extremely entertaining and informational and extremely relaxing. Thank you, sir

  8. 29:00 A “plug” is the part at the end of a cord that goes into a socket.
    ‘To plug a hole’ The plug is the bit that goes into the hole.

Leave a Reply

Your email address will not be published. Required fields are marked *